copy of Nicholls & Clarke Vinyl/Tile tray former FROM:

Glass reinforced plastic resin, suitable for concrete and timber floors. To form a wet room or level access shower. Accepting a high point load of 300KG. Suitable for wheelchairs also.

• 22mm depth

• Can be covered by Vinyl or tiles

• Built in gradients to remove waste water

• Total level access

• Waste offset to avoid joists and pipework

• Standard pre cut waste suitable for gravity or pumped wastes

• No under boarding is required

• trimmable edges up to 60mm

• 300KG loading capacities

The Aquaseal Wet Room System gives you everything you need to waterproof both walls and floors prior to tiling showers, wet rooms, wet zones and other areas susceptible to water and excessive moisture. Ideal for use on Plasterboard, MDF, Plywood, Cementitious Boards, Blockwork, Concrete and Specialist Wet Room Boards. The Aquaseal Tanking Kit is available in two sizes; Standard - everything you need to waterproof 4.5m² and Large - everything you need to waterproof 7.5m². Both kits come complete with:

• Aquaseal Waterproof Tanking Primer (1L) - For use before applying Tanking Membrane & Tanking Tape. 
• Aquaseal Waterproof Tanking Membrane (3LTR - Standard, 5LTR - Large) - Forms a permanently flexible watertight membrane, applied by brush, two coats.
• Aquaseal Waterproof Tanking Tape (5MTR - Standard, 10MTR - Large) - Self adhesive joint & corner sealing tape. Easy to apply with pre-cut release liner. 
• Aquaseal Waterproof Tanking Drain Mat - Self adhesive butyl backed fleece, capable of coping with movement around the drain outlet.
• Aquaseal Wet Room System User Leaflet

Horizontal gulley:

• Visible diameter of 120mm
• Overall diameter 197mm
• 117mm high
• Flow rate 48 littres per minute
• Supplied complete with adapter

Vertical gulley:

The vertical gulley is the same system but with a vertical outlet allowing a straight through option:

• Visible diameter of 120mm
• Overall diameter 200mm
• 189mm high
• Flow rate 48 littres per minute
• Supplied complete with adapter

Tile gulley option:

Have the same specification as vertical and horizontal, but supplied with a tile adapter. The grating adapter is placed over the gulley and situated at the correct height so drainage into the outlet is achieved. Simply tile of from the outer edge.